生産基準 - 上海本渓溶接研究インテリジェントテクノロジー株式会社

私たちについて

——

私たちについて

——

本渓溶接研究における生産と加工の各段階で備えなければならない基本要素には、計画、実施、検査、廃棄などがある。

これらの4つの要素は、各リンクで継続的にループされ、改善されます。

1.文書化されたシステムとシステム

従業員の作業基準を導くための品質マニュアル、手順書、関連文書（調達業務マニュアル、従業員マニュアル、会社管理システム、加工組立業務仕様書、品質検査指示書、アフターサービスガイドライン、払い戻しシステム、福利厚生システムなど）を確立する

2.管理アーキテクチャの標準化

組織図を作成し、職務責任制度を実施する（会社は、総経理室、管理部、調達部、営業部、研究開発部、品質検査部、アフターサービス部、人事部、生産製造部などに分かれており、各部がそれぞれの職務を遂行する）

3.計画運転モード

工程監視計画と作業指示書（調達、倉庫保管、資材調達、加工・生産、組立、試験、品質検査、耐久性デバッグ、完成品倉庫保管、出荷、アフターサービスなど）を策定し、生産部門がリアルタイムで全工程の調整・追跡を行う。生産・加工に関わる部門は、それぞれの責任を果たし、安全な生産、製品品質と生産効率を確保しながら、適応と連携を強化する必要がある。

研究開発部門

1. The personnel and equipment configuration of the R&D department are complete, and a sound design process is established. The R&D department has established a R&D system with department heads as responsible persons, and dedicated designers are assigned to design drawings, which are reviewed and finalized by department heads;

2. According to the drawings for trial processing, the production department will make a sample and submit it to the R&D department for testing. After passing the test, it can be processed and produced. If it is not qualified, the R&D department supervisor will propose improvement suggestions, and then the sample will be made and tested. Only after passing the test can it be officially produced

生産製造部門

1.The Production Department is equipped with skilled personnel and complete machinery. It follows strict safety procedures, inspection standards, and a 6S management system, with the department manager as the primary responsible person.

2.Upon receiving the drawings, production is carried out as per the process. Finished parts are inspected by quality control and only qualified ones are warehoused. Unqualified parts require handling instructions from QC. The department must strictly follow safety norms and enforce 6S standards under the manager’s supervision.

アフターサービス部門

1.The after-sales service department is fully equipped with technical personnel, tools, and equipment. The department manager assumes primary responsibility, overseeing internal affairs and coordinating with other departments.

2.The after-sales service department is responsible for pre-delivery testing of company equipment, providing written improvement suggestions for any issues found, and also handling on-site commissioning and training for customers.

管理部

1.The Administration Department is fully staffed and equipped, with the department manager serving as the primary person responsible.

2.The Administration Department is responsible for formulating and implementing various rules and regulations, and conducting daily performance evaluations for employees.

3.It also supervises safety during the production process, ensuring employees follow the Safety Operation Manual, and proposes corrective actions for any issues found, ensuring they are implemented.

1、研究開発部門

2、生産製造部門